|
Half Gondola
Wall Section Pricing
Wall Store Shelving Pricing per 3 foot or 4 foot sections
All pricing with pegboard back on our most popular sizes and Base Deck Shelves
All sections and ends include
uprights, backs, lower shelves, kick plates, shoes, and shoe covers. Shelves
are sold separately.
|
Wall Corner
Sections
Inside and outside corner
sections available for Wall Store Shelving. |
Shelf Fencing & Dividers for Store
Shelves
The solution for maintaining separation
of school, office and art supplies. Dividers are 3 3/4" wide x 7 3/4" high x
6 3/4" deep. The dividers clip into front shelf perforations. Minimum
product width is 6". End dividers are sold separately and in pairs. |
What is a Wall Section and
a Wall End?
If you will notice via the
illustrations below the Wall Store Shelving Section includes everything except the second
Wall End as only one Wall End is needed per Wall Section when creating a
multi section Gondola Aisle. To complete the Wall Aisle a Wall End is
Necessary. |
Wall Section
To create a Wall Section or Unit as
pictured in the images on the top of this page you will use the Wall Section
pieces below to configure your aisle length as the sections are available in
either 3 or 4 foot sections and your will need an end to complete your aisle
of Wall Aisle. |
Wall End
A Wall End is used to complete a
Gondola Aisle. For example a 16' Wall Aisle will consist of 4 Gondola
Sections and 1 Wall End to complete the Aisle. |
|
 |
 |
|
A Wall Section includes 1 lower shelf, 1
upright, 1 upright cover, 1 base shoe, 1 hardboard back, 1 kick-plates, 1
base shoe cover, 1 upper spanner, 1 center spanner, and 1 lower spanner. |
A Wall End includes 1 upright, 1
base shoes, 1 base shoe covers, and 1 upright cover. |
[gondola_shelving/shelving.htm] |
|
|
Gondola Wall Mount Store Shelving
A Wall Mount Section includes: one Basic
Upright with Cap, one Base Shelf, one Kickplate, one Back Panel and one Top,
Center, and Lower Spanner. If the Gondola is 78" tall or taller, the section
would also include one Splicer Spanner.
Wall
Mount shelving height start at 36 inches with a maximum height of 96 inches, a
deck base starting at 12 inches wide and a maximum width of 30 inches.
Wall Store Shelving is a great store
fixture designed especially to display all types of merchandise for all types of
stores such as: Hardware Store, Clothing Store, Beauty Supply Store, Convenience
Store, Retail Store, Grocery Store, Pet Store, Toy Store, and more.
Wall Sections may also be used as end caps.
What is the difference between
Gondola Store Shelving and Wall? The Gondola shelving is also called
Gondola Island Shelving. Using the term island the Gondola Shelving stands
in the center of the floor on as a island type product display. The wall
store shelving is store shelving that is installed against a wall. |
