Digital announcer/recorder
• Built in 2 watt amplifier to connect directly to speakers
• Designed to providemusic and promotion on hold by using playback in a continuous loop or alternating between promotions and an auxiliary music source at 2 second to 30 minute intervals
• Any number of multiple messages may be recorded
• Announcer comes with four professionally pre-recorded promotions on hold pacifier messages, as well as, power supply and cabling for an easy plug and play installation
• Output may be connected directly to loudspeakers with messages repeated in timed intervals or played at the push of a button for museum displays, information booths, point of interest locations, etc.
• 7.5 minutes of user recordable memory (select fromuser recorded messages or four pre-recorded on-hold pacifier messages)
• Three playback options:on demand, continuous, and timed intervals
• Non-volatile memory (no batteries required)
• Record from electret mic, carbon handset, tape, CD, PC sound card or any line level device
• 600 ohm audio output for high wattage amplifiers
• Multiple message capabilities (total number of messages only limited to maximum record time)
• AGC (Automatic Gain Control) for trouble free recording
• Auxiliary audio (MOH) input for between message background music
• Remote trigger input for on-demand playback from a remote contact closure
• Press and hold play mode
• Status LED forrecord and playback indication
• Master and auxiliary input volume controls
• I.O. communications port (allows only one DVA-2WA to announce at a time)
• Power: 120V AC/12V DC, 500mA adapter provided
• Dimensions: 133mm x 89mm x 44mm (5.25" x 3.5" x 1.75")
• Shipping weight: 1.0 kg (2.2 lbs)
• Environmental: 0*C to 32*C (32*F to 90*F) with 5% to 95% non-condensing humidity
• Frequency response: 100-3.4KHz
• Sampling rate: 64K (equivalent)
• User message length: 7.5 minutes maximum
• Recording audio input level: 30mV - 1.0V RMS (AGC range), 600 Ohm audio output level: 0.3V RMS maximum (across a 600 ohm load)
• Speaker output power: 2 watt peak
• Connections: (1) 6-position cage clamp terminal block, (3) 3mm (1/8") audio jacks, (1) handset jack
• Pre-recorded pacifier message length: 30 seconds total
• Minimum speaker impedance: 2.66 Ohms: (3) 8-Ohm speakers
This product was added to our catalog on Tuesday 18 February, 2014.
